Resin Gulvbeklædning

grid
list
DUROFLOOR-BI

Two-component, colorless epoxy impregnation

Two-component, colorless, solvent-based epoxy resin. Used as an impregnation on cement-based substrates to provide higher stability and abrasion resistance. Prevents the formation of dust on floor surface. Also, used as a primer f...
mere...
NYE
DUROFLOOR

Two-component, self-leveling epoxy flooring

Two-component, self-leveling epoxy flooring with high mechanical and chemical resistance. Ideal for industrial areas, warehouses, hotels, laboratories, stores, garages etc. Suitable for food contact surfaces, according to W-347. A...
mere...
NYE
DUROFLOOR 11

Two-component epoxy coating and self-leveling flooring

Two-component, solvent-free epoxy flooring. With the addition of quartz sand M32 at ratio of 1:1 by weight, it can be used as a self-leveling epoxy flooring. Without the addition of quartz sand, it can be applied as a brushable ep...
mere...
NYE
DUROFLOOR-R

Two-component, brushable epoxy coating

Two-component, solvent-free brushable epoxy coating, suitable for concrete or cement mortar surfaces. It is classified as SR-B2,0-AR0,5-IR4, according to EN 13813.
mere...
NYE
DUROFLOOR-C

Two-component, self-leveling, conductive epoxy flooring

Two-component, solvent-free, self-leveling, conductive epoxy flooring, used to eliminate static electricity problems. Classified as SR-B2,0-AR0,5-IR4, according to EN 13813.
mere...
NYE
DUROFLOOR-CV

Two-component, conductive epoxy varnish

Two-component, conductive epoxy varnish. To be used before DUROFLOOR-C. Classified as SR-B2,0, according to EN 13813.
mere...
NYE
DUROFLOOR-PSF

Two-component, solvent-free epoxy primer

Two-component, solvent-free epoxy primer. It is used as a primer on surfaces that will be subsequently coated with epoxy flooring systems, as a binder for preparing epoxy mortars with the addition of quartz sand and also for seali...
mere...
NYE
DUROPRIMER

Two-component epoxy primer

Two-component, colorless, solvent-based epoxy primer. Used on substrates that will be coated with epoxy layers of the DUROFLOOR system. Classified as SR-B2,0, according to EN 13813.
mere...
NYE
DUROPRIMER-W

Three-component, water-based epoxy primer

Three-component, water-based epoxy primer. Used for priming wet or fresh (age < 28 days) concrete floors that will be subsequently covered with epoxy layers of the DUROFLOOR system. Classified as SR-B2,0, according to EN 13813....
mere...
NYE
TOPCOAT-PU 720

Alifatisk, elastisk polyuretan top coat

En komponent, alifatisk, polyuretan top coat. Anvendes til beskyttelse af ISOFLEX-PU 500 og ISOFLEX-PU 550 mod solens stråler (UV), særligt hvis den endeligt ønskede farve er mørk. Egner til projekter hvor polyuretan vandtætnings ...
mere...
NYE
DUROFLOOR-PU

Two-component, brushable polyurethane coating

Two-component, colored, polyurethane coating without solvents, with excellent resistance to UV radiation. DUROFLOOR-PU is used as a coating on concrete floors, cement screeds, etc. Classified as SR-B2,0-AR2-IR8, according to EN 13...
mere...
NYE
DUROFLOOR-CMT

Three-component, self-leveling epoxy-cement flooring

Three-component, self-leveling, solvent-free epoxy-cement flooring. Used for repairing and leveling cement-based floors that are going to be covered with DUROFLOOR epoxy systems, polyurethane coatings, plastic floorings, wooden fl...
mere...
NYE
DUROPRIMER-SG

Tokomponent epoxy primer til cement gulve

Tokomponent, solventfri epoxy primer. Produktet anvendes som et vandtættende lag på gulve som udsættes for stigende fugt og som skal beklædes epoxy gulvbeklædning eller cementpudslag. Derudover kan produktet anvendes som primer un...
mere...
NYE
EPOMAX-MT

Three-component, high-strength, pourable epoxy grout

Three-component, pourable, high-strength, non-shrinking cast grout. Based on a two-component solvent-free epoxy resin and on specially selected quartz sand. It provides high initial and final strength, excellent bonding with steel...
mere...
NYE
DUROFLOOR-RL

Two-component, brushable epoxy coating – LEED complied

Two-component, solvent-free, colored epoxy system, with a very low content of volatile organic compounds (VOC), in compliance with the LEED requirements. Used as a brushable coating on concrete floors, cement screeds etc., when hi...
mere...
NYE
DUROPRIMER-PRO

Two-component, solvent-free epoxy primer

Two-component, solvent-free epoxy primer. Used as a primer on cementicious substrates to be coated with epoxy layers of the DUROFLOOR system. With the addition of quartz sand it can be used as resin-mortar or as a crack-repairing ...
mere...
NYE
DUROPRIMER-RL

Two-component, solvent-free epoxy primer – LEED complied

Transparent, two-component, solvent-free epoxy primer, with a very low content of volatile organic compounds (VOC), in compliance with the LEED requirements. Used as a primer for epoxy flooring systems, for the preparation of resi...
mere...
NYE
EPOXYPRIMER 500

Tokomponent, vandbaseret, epoxyprimer

Tokomponent, vandbaseret, epoxyprimer. Anvendes som en primer til ISOFLEX-PU membranerne når de udføres på ikke absorberende overflader eller på gamle vandtætningslag. Egner sig også som primer til cement-baserede substrater såsom...
mere...
NYE
DUROFLOOR-R THIXO

Slip-resistant, brushable, two-component epoxy coating

Two-component, colored, brushable epoxy coating. It forms a rough, slip-resistant surface. Suitable for concrete or cement mortar floors. Classified as SR-B2,0-AR0,5-IR4, according to EN 13813.
mere...
NYE
ISOMAT PUA 1360

Tokomponent, meget elastisk, ren polyuretan membran

Tokomponent, solventfri, meget elastisk, hurtigt hærdende, ren polyuretan membran til udførsel med spray. Produktet anvendes når der kræves høj mekanisk og kemisk resistens. ISOMAT PUA 1360 er ideelt til overflader som udsættes fo...
mere...
NYE
ISOMAT PUA 1240

Tokomponent, hybrid polyuretan vandtætnings membran

Tokomponent, solventfri, meget elastisk, hurtigt hærdende hybrid polyuretan membran til udførsel med spray. Produktet kan anvendes til en række vandtætningsapplikationer når det kræves at der arbejdes hurtigt. Ideel til vandtætnin...
mere...
NYE
ISOMAT PUA 2230

Two-component, highly resistant, pure polyurea membrane

Two-component, highly resistant, fast-curing, pure solvent free, polyurea membrane for spraying application. Used in plenty of waterproofing and protection applications, that require high mechanical and chemical resistance. Also r...
mere...
NYE